USED B.C.Rich / Mockingbird ST with Rockfield PU Trans Honey Burst [11]

Experience the SLASH specification at an overwhelmingly affordable price!
A fan favorite, this faithful reproduction of the Mockingbird SL at a low price features a through-neck construction with a 3-piece maple neck and ebony fingerboard, mahogany/ebony body wings, and a quilted maple top for both beauty and sustain.
Two Rockfield Mafia pickups and a Floyd Rose Original tremolo are combined with a coil tap/phase/5-way rotary switch. The abundant sound variation makes it suitable for a wide variety of playing styles as well as rock.

The truss rod cover and back panel are missing, and the lock nut screws have been replaced with silver.
There is a ding on the neck grip at the 3rd fret on the 1st string side with paint baldness, but it does not affect the playing.
The body has a lot of paint damage, with paint chips on the tip of the first string side horn and on the tip of the body side near the controls, and there is a noticeable paint peel on the body back end.
The neck is in good playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: E09081122
Year of manufacture: 2009
Country of manufacture: Korea
Case: Original soft case
Weight: 3.86kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, enough fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modified part: Insert block is stuck, so it was completely replaced.
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, insert block replacement

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
E09081122

Year of manufacture
2009

Country of manufacture
South Korea

Case
Genuine soft case

Weight
3.86kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modified part
Insert block has been replaced due to sticking

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, insert block replacement