USED Chaki / W-60 Natural [11]

Chaki brand acoustic guitars popular for their high quality and made in Japan
The Chaki brand was born from the Chaki stringed instrument factory, which started out manufacturing contrabasses in Kyoto, Japan.
It has a spruce top, rose sides and back, and mahogany neck. Chord playing is well separated and sounds pleasantly.
There are cracks around the truss rod hole and the sound hole near the neck.
The pegs have been replaced, and there are marks where pickups were installed, and the battery box remains inside the body. End pins are missing.
There are scratches, dents, and other signs of use. The neck is wavy and there is no room to lower the saddle, so the string height is set high.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: Japan
Case: Hard Case
Truss Rod: No problem, with a note that the rod has been checked up to 60 degrees to the left and right (with some waviness).
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 3.0mm above 12th fret
String height on treble string side: 2.6mm above 12th fret
Nut width: 43.8mm
Neck thickness near 1st fret: 22.1mm
SCALE: 642mm (25.26")
RADIUS: 356mm (14")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, and alignment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Country of manufacture
Japan

Case
Hard case

Truss Rod
Note: Rod has been checked up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
3.0mm above 12th fret

String height on treble string side
2.6mm above the 12th fret

Nut width
43.8mm

Neck thickness near 1st fret
22.1mm

Scale
642mm (25.26")

RADIUS
356mm (14")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, and alignment