USED Fender Japan / TL62B Trans Blue [11]

Fender Japan "TL62B" featuring body binding is in stock!
It consists of a bound body made of alder, maple neck, and rosewood fingerboard.
The fretboard and bridge are vintage style, and the neck is thin and very easy to play.
The original "TL VINTAGE" pickups are mounted, and an aged pickguard and spiral saddle bridge are used.
Alder wood body gives this guitar an attractive midrange!
This is one that can be used for all genres of music.

There are some scratches and dents on the overall appearance.
There are large dents on the top of the body and near the controls, and dents and chips on the sides and binding.
There are scratches on the pickguard, scratches on the control panel, and dents and scratches on the back of the body near the end.
There are scratches on the head, multiple dents, dings, and paint chips on the back of the neck, and rust and tarnish on metal parts.
The jack cup was missing, so it was installed and the 19th fret was replaced.
The neck is in perfect playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: JD13018465
Year of manufacture: 2013
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.56kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret replacement

Specs: Rhodium-plated

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
JD13018465

Year of manufacture
2013

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.56kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
22.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, fret replacement