USED Momose / MJM1-STD Old Candy Apple Red [11]

JM type model with alder body made by MOMOSE, a brand made by craftsmen in Nagano, Japan.
The wide pickup construction and the position of the tailpiece give it a milder sound than the ST and TL, which were preferred by SURF music guitarists rather than JAZZ guitarists, but have recently been widely used for ROCK and POPS.
The design tends to produce a loose sound, but the tight construction of the Momose guitar shows off its charm.

There is a paint chip near the joint plate. Some metal parts are slightly dull and rusted.
There are scratches, dents, and some signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 8747
Year of manufacture: 2018
Country of manufacture: Japan
Case: Original gig bag
Accessories: Arm
Weight: 3.42kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 24.0mm
SCALE: 648mm (25.5")
RADIUS: 210mm (8.26")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 8747

Year of manufacture 2018

Country of manufacture Japan

CaseGenuine gig bag

AccessoriesArm

Weight3.42kg

No truss rod problemNo problem when rod has been checked up to 60 degrees left and right

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.8mm

Neck thickness near the 1st fret 22.0mm

Neck thickness near 12th fret 24.0mm

Scale 648mm (25.5")

RADIUS210mm (8.26")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment