USED YAMAHA / SG2000 Cherry Sunburst [11]

The SG series SG2000 is YAMAHA's greatest masterpiece, which is still gaining popularity in Japan and abroad.
Hard maple T-cross maple top reminiscent of Les Paul, seamless through-neck construction with integrated neck and body.
High-grade ebony fingerboard. Equipped with a bi-sound system that switches the humbucker of each PU to a single coil sound by pushing/pulling the front and rear tone controls.
The overall appearance of the guitar is cloudy white, and there are numerous dents with peeling gold parts plating, scratches, and paint dents, giving the guitar a slightly strong feeling of use.
The neck is twisted and wavy, but the frets have been adjusted and there is currently no sound blockage.
There are a few frets left.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Truss rod: No problem, as checked up to 60 degrees to the left and right (torsion and waviness)
Fret rest: Defective, need to consider replacing next time when repairing.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 19.8mm
Neck thickness near 12th fret: 24.4mm
SCALE: 628mm (24.75")
RADIUS: 432mm (17")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or other damage not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Truss Rod
No problem, but we have checked the rod up to 60 degrees to the left and right.

Fret remainder
Defective, need to consider replacing at next repair

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
19.8mm

Neck thickness near 12th fret
24.4mm

Scale
628mm (24.75")

RADIUS
432mm (17")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair