USED Fender Japan / JB62 Vintage White [11]

Fender Japan 2012 Dinah Instruments "JB62" is in stock!
Basswood body, maple neck, rosewood fingerboard.
Equipped with two genuine Fender Japan JB type pickups.
Two volume and one tone controls are standard.
There are scratches, dents, and paint chips throughout.
There are dents on the top of the body under the rear pickup, and numerous paint chips and chipping on the back and sides of the body.
There are rust and tarnish on metal parts, and there are some playing scratches on the pickguard.
There is no noticeable abnormality on the neck, and there are no problems with playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: MIJ JD120222847
Year of manufacture: 2012
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.94kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.0mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 25.6mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
MIJ JD120222847

Year of manufacture
2012

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.94kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.0mm

Neck thickness near 1st fret
20.7mm

Neck thickness near 12th fret
25.6mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment