USED Ibanez / RG8670 j.custom Deep Red [11]

Tree of Life inlays are eye-catching on this top-of-the-line J.Custom model made in Japan by Ibanez.
It consists of a AAA-class maple top, mahogany body, 5-piece maple and bubinga neck, and ebony fingerboard. Pickups are dimarzio Air Norton on the front, dimarzio Blue Velvet in the center, and dimarzio Tone Zone in the rear.
The neck is one of the thinnest in the Ibanez line of guitars, allowing for quick fingering with light force, and satisfying the needs of hard rock and metal players.
Equipped with EDGE Pro, which is hard to find in recent years. The bridge is equipped with a sound chip to prevent the insert block from falling off, which tends to happen when changing strings, and the tight and powerful pickups with no peculiarities make the instrument versatile enough to be used by anyone in any genre.
The fret indentation remains slightly, although it has been abraded to the limit.
There are slightly more dents and cracks on the body back and back of the neck. There are paint chips around the jack.
There is a crack at the neck joint at the strap pin.
Overall, there are scratches and dents, and the guitar shows signs of use.
The neck is almost straight and in playing condition.
The hard case is partially cracked. Please be careful to avoid injury.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 48051
Country of manufacture: Japan
Case: Original hard case
Accessories: Arm
Weight: 3.95kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 17.1mm
Neck thickness near 12th fret: 20.0mm
SCALE: 648mm (25.5")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modification: Jack
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* The truss rod, fretboard rest, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
48051

Country of manufacture
Japan

Case
Genuine hard case

Accessories
Arm

Weight
3.95kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Remaining frets
Note that the frets are low and can still withstand cutting.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
17.1mm

Neck thickness near 12th fret
20.0mm

Scale
648mm (25.5")

RADIUS
406mm (16")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modified part
Jack

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment