USED Greco / WS-STD SSH Metallic Red [11]

The WS-STD of the Greco WS series is a stylishly designed model with a re-examined body form and neck grip, aiming to improve operability and playability.
The body, made of basswood with flat acoustic characteristics, is slim and 42mm thick to fit the body, making it easy to handle for both first-time guitarists and long-time guitar players. The neck is narrow with a nut width of 40mm, and the neck grip is thin for smooth fingering.
There are some minor scratches, but it is in relatively clean condition.
The neck is in good playing condition.
The pegs have been replaced with GOTOH locking pegs and locking pins.
Strap side parts are not included.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: A010297
Country of manufacture: Japan
Case: Soft case
Weight: 2.98kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.2mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 23.4mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
A010297

Country of manufacture
Japan

Case
Soft case

Weight
2.98kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.2mm

Neck thickness near 1st fret
21.8mm

Neck thickness near 12th fret
23.4mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment