USED Suhr / J Select Modern Plus Copperhead Burst [11]

The "J Select Modern Plus", a Japan limited edition created in collaboration with Suhr, is now in stock!
John Suhr's favorite specs Flame maple top and basswood back body, which is also used in the Core line.
The neck is made of roasted maple, which is highly resistant to temperature and humidity changes and has a unique sound.
Loosened maple fretboard is used on this model!
Front: SSV50mm Center: Suhr V60LP Rear: SSH Plus 53mm Pickups.
It is equipped with 1 volume and 1 tone (push / pull switch).
The Copperhead Burst color, which is usually only available for custom orders, coupled with the beautiful flame maple top, makes the V60LP a very versatile instrument with a great core value in terms of looks and playability.
The Copperhead Burst color, which is usually only available for custom orders, coupled with the beautiful flame maple top, gives this guitar a strong character that surpasses the core line in both looks and playability!

This is a beautiful and good condition instrument with only minor scratches and small dings!
There is a ding on the bottom of the volume control and a ding on the back of the body near the contour.
The protective film on the top of the body is still intact.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 72439
Country of manufacture: USA
Case: Original gig case
Accessories: Arms, Spec Sheet
Weight: 3.42kg
Truss Rod: No problem, rod is checked to 60 degrees to the left and right.
Fret Depth: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 21.8mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10"-356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
72439

Country of manufacture
U.S.A.

Case
Genuine gig case

Accessories
Arm, Spec Sheet

Weight
3.42kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.8mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
21.8mm

Scale
648mm (25.5")

RADIUS
254mm (10")-356mm (14")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment