USED Valley Arts / M-Series ST Type See?through Green [11]

The ST style of the Valley Arts M Series comes in an impressive bright transparent green color.
Constructed with an ash body, maple neck, and rosewood fingerboard. The matching head design is consistent and beautifully finished from body to neck to head, giving it a stage-worthy look.
The SSH configuration of the original pickups, depicted as Valley Arts Manufacturing, allows for flexible sound makeup for a wide range of genres. The bridge is equipped with a Floyd Rose tremolo unit to ensure tuning stability when arming. Hardware unified with gold parts gives it a high-class feel, and the attention to detail can be felt in every detail of this instrument.
It is meticulously crafted and has very good playability.
Back panel is missing.
There is a ding on the first fret fingerboard.
There is a crack on the neck joint. There are paint reaction marks on the body end. There are seal marks on the back.
The saddle, rock screws, and insert blocks have been replaced due to numerous rusted and sticking bridge parts.
Overall, there are scratches, dents, paint chips, and metal rust.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: VC160
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.94kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 19.9mm
Neck thickness near 12th fret: 22.7mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
VC160

Case
Non-genuine soft case

Accessories
Arm

Weight
3.94kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
19.9mm

Neck thickness near 12th fret
22.7mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair