USED YAMAHA / RS720B REVSTAR Ash Gray [11]

The Revstar is the top model of Yamaha's modern classic series.
The ash gray color with flame maple top and Bigsby B50 vibrato gives it a distinctive stage presence.
The body is made of mahogany with a flame maple top and a 3-piece mahogany set neck, and two VT5 humbuckers (Custom Wound / Alnico V) provide a fat, thick sound. A push/pull "Dry Switch" allows for a wide variety of sound creation, including single-coil-like clear tones.

The combination of a tune-o-matic bridge and a Bigsby B50 ensures a stable pitch while adding a vintage-like shimmer. Locking pegs provide practicality as well.

Combining the rich sustain of a traditional set-neck construction with the high playability of a cutaway, the RS720B combines classical charm with modern operability.
There are scratches and dings, and the instrument shows some signs of use.
Overall, there is no major noticeable damage, but there are minor abrasions, small dents, and other signs of use throughout.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: HMO0163WW
Year of manufacture: 2016
Country of manufacture: Indonesia
Case: Non-authentic gig case
Weight: 3.90kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String Height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.9mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
HMO0163WW

Year of manufacture
2016

Country of Manufacture
Indonesia

Case
Non-genuine gig case

Weight
3.90kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
24.9mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing