USED Edwards / E-FV-85D Mod Vintage White [11]

Flying V style by Edwards, a brand directly affiliated with ESP.
It has a classic look and lightweight body that is easy to handle, and is made with the high precision that can only be achieved in Japan.
In addition to the standard vintage white color, this model is equipped with a mirror-finished red pickguard. The custom parts were probably retrofitted to give the guitar a unique look that looks great on stage.

The rear pickup is equipped with the Bill Lawrence L-500, a famous pickup used by many artists. The high output and clear tone delivers a crisp sound from heavy riffs to sharp leads. A Seymour Duncan SH-1n on the front provides a warm sound that can be used in a wide range of genres.
This is a "unique V" with a classic style that has been customized by the player.
A paint crack can be seen on the lower right side of the top of the body when viewed from the front.
Also, there is a mark on the inside left side of the body where the strap pin has been repositioned, and the hole has been filled in.
In addition, there are some scratches, dents, and stains overall, but there is no noticeable damage other than the above, and the appearance is that of a moderately used instrument.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: ED1213569
Year of manufacture: 2012
Case: Non-authentic soft case
Weight: 2.70 kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Depth: No problem, enough fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
ED1213569

Year of manufacture
2012

Case
Non-authentic soft case

Weight
2.70kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.2mm

Neck thickness near 1st fret
21.6mm

Neck thickness near 12th fret
24.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment