USED YAMAHA / SFX-II Red Black Sunburst [11]

This rare model was produced in limited quantities for the Japanese domestic market in the late 1980's. It features a basswood body with excellent tone balance, a mahogany neck, and a rosewood fingerboard.
It features a basswood body with excellent tone balance, mahogany neck, rosewood fingerboard, and is equipped with two original humbuckers. It is also equipped with a coil tap function for a wide variety of sound variations.
Originally, the tone pot was a push/pull type, but in this model, that function has been relocated to the volume pot side.
It is also equipped with a locking tremolo, making it an excellent choice for a wide range of genres, especially hard rock.
There are some marks around the tone section that have been filled in. Metal parts have flaking plating and rust.
There are numerous scratches on the body back.
There are other scratches and dents throughout, and it has some signs of use.
There is a large twist in the neck, but the string height has been adjusted and worn out, so there are no problems with playing the instrument as it is now.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: GY29055
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.03kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 23.7mm
SCALE: 635mm (25")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number GY29055

Country of manufacture Japan

CaseNon-genuine soft case

Weight 4.03kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.0mm

Neck thickness near 1st fret 20.9mm

Neck thickness near 12th fret 23.7mm

SCALE 635mm (25")

RADIUS406mm (16")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment