USED Orville / LPC-75 Ebony [11]

Orville Les Paul Custom Type "LPC-75" is in stock!
Orville is a brand directly affiliated with Gibson, and has remained popular even after its production was discontinued due to its high quality and cost performance that can only be achieved by being made in Japan.
Judging from the serial number, this one seems to have been manufactured by Fujigen in 1996.
Maple top/mahogany back body, mahogany neck, rosewood fingerboard!
The gold parts and double binding give it a gorgeous custom look and a royal rock sound!
There are scratches and dents on the overall appearance.
Metal parts are rusty and dull, and there are dents and chips on the head.
Front and rear escutcheons have been replaced (including 4 screws each).
(PRPR-010 and PRPR020 made by Gibson are installed.)
There is no noticeable abnormality in the neck, and there is no problem in playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 610501
Year of manufacture: 1996
Case: Non-authentic soft case
Weight: 4.56kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Depth: No problem, enough fret height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 25.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, front and rear escutcheon replacement (including 4 screws for each)

* Please note that this is a used item and there are scratches, dents, etc. that may not show up in the photos or are not shown in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos.

* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number 610501

Year of manufacture 1996

CaseNon-genuine soft case

Weight 4.56kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness near the 1st fret: 21.3mm

Neck thickness 25.6mm near 12th fret

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise adjustment, front and rear escutcheon replacement (including 4 screws each)