USED Grover Jackson / Dinky AXE CUSTOM Gradation Red [11]

Rare Japanese-made Grover Jackson! Uniquely designed SSH configuration delivers a wide variety of sounds!
The Grover Jackson Dinky AXE CUSTOM is a rare model manufactured for the Japanese market in the early 1990s. The body is made of lightweight and good sounding yellow poplar, and the maple neck and ebony fingerboard combine to provide excellent playability.
This model has SSH configuration, but the two front single coils are mounted as one unit, giving the impression of HH in appearance. The model features highly reliable parts such as a Schaller tremolo, and is a rare Japanese-made Grover Jackson that can be recommended for collectors and players alike.
There is a crack in the paint on the tip of the head and a chip in the paint near the body end jack.
There are also scratches, dents, and dull parts.
The neck is a little high, but it has been set up including mortise and groove and is in good playing condition.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 306512
Case: Hard Case
Weight: 3.60kg
Truss Rod: No problem (with a slight high spring).
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.4mm
Neck thickness near 1st fret: 18.1mm
Neck thickness near 12th fret: 20.2mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
306512

Case
Hard case

Weight
3.60kg

Truss Rod
No problem (with a little high spring)

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.4mm

Neck thickness near 1st fret
18.1mm

Neck thickness near 12th fret
20.2mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair