USED Fender / Made in Japan Traditional II 60s Jaguar 3-Color Sunburst [11]

This is one that faithfully reproduces the characteristics of the 60's Jaguar with the high precision of Japanese manufacturing.
The body is made of basswood and the fingerboard is made of rosewood. Two vintage-style Jaguar single coils are mounted on the pickups, covering a wide range of tones from bright and crisp to warm clean.
The 24" scale, unique preset circuit, and floating tremolo all give the guitar a solid Jaguar feel.
Buzz stop bar has been retrofitted.
The position of the endpin has been changed, and the hole in the original position remains. The original holes have also been shaved and extended.
There are dents and accompanying paint chips, scratches, pickup rust, and other signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: JD23001149
Year of manufacture: 2023
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.43kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 22.9mm
SCALE: 610mm (24")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD23001149

Year of manufacture
2023

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
Arm

Weight
3.43kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.0mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
22.9mm

Scale
610mm (24")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment