USED Grover Jackson / KE.c.u-65 Kelly See-through Black [11]

KE.c.u-65 Kelly" produced in Japan is now in stock.
Inherited Jackson Kelly style. This is a high cost-performance instrument carefully manufactured at a factory in Japan.
The body is made of poplar with a flame maple top, which is both lightweight and has a solid sound and beautiful looks. The maple neck is bolt-on jointed, and the fingerboard is rosewood. The traditional Jackson specs such as shark fin inlays and 24 frets are still in place.
Two Duncan Designed HB-103 pickups are installed. Designed specifically for high-gain sounds, they feature a clear tone that does not lose its core even when deeply distorted. In addition, a floating tremolo made by Takeuchi is installed to provide high stability for arming. The controls are a simple 1Vol, 1Tone, and 3-way selector. Designed for practical playability without excessive decoration.
The specs and finish are as good as those of the USA-made Jackson, and it still boasts strong popularity even today.
Missing arms.
Paint is chipped on both corners of the body end side. There are some scratches and dents.
Metal parts are dull.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 701405
Case: Soft case
Accessories: * Arm missing
Weight: 4.10kg
Truss Rod: Note that the rod has been checked up to 60 degrees to the left and right and is fine (with some waviness).
Fretboard: No problem, sufficient fretboard height.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.6mm
Neck thickness near 1st fret: 17.7mm
Neck thickness near 12th fret: 19.1mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
701405

Case
Soft case

Accessories
* Arm missing

Weight
4.10kg

Truss Rod
Note: Rod has been checked up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.6mm

Neck thickness near 1st fret
17.7mm

Neck thickness near 12th fret
19.1mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing