USED Fender Japan / JB-42J Sunburst [11]

Made in 1998, this is a jazz bass from the Fender Japan Standard series, the entry-level model at the time.
With a basswood body finished in the standard sunburst color, maple neck, and rosewood fingerboard, it has a royal style.
The neck is slim and easy to grip for excellent playability.
It has a crisp attack typical of jazz basses and a core low frequency range, making it suitable for a wide range of playing from slapping to fingerpicking.
All wiring materials have been replaced due to deterioration. The capacitor is genuine Fender.
There is a rubber on the back of the rear pickup.
There are sunburn and sticker marks on the pickguard. Metal parts are rusted and dull.
There are paint chips on the side of the body. There are other scratches and dings, but the guitar is in good condition considering its age.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: O004623
Year of manufacture: 1998
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.22kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.3mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 24.3mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret side burr correction, all pegs fixed, electrical repair (front volume pot, rear volume pot, master tone pot, jack, wiring materials replaced)

* There are some scratches, dents, etc. that are difficult to see in the photos or are not listed because of the used nature of the instrument. Please note that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, fretboard remaining, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
O004623

Year of manufacture
1998

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.22kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.3mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
24.3mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, fret side burr correction, all peg operation sticking correction, electrical repair (front volume pot, rear volume pot, master tone pot, jack, wiring material replacement)