USED Edwards / E-HR-135-III White [11]

Edwards' E-HR-135-III combines high-performance playability and a wide range of sounds.

The through-neck construction, ebony fingerboard, and 24 frets allow for comfortable technical playing.

Pickups have been replaced with Seymour Duncan SH-2N on the front and SH-4 on the rear. A wide range of sounds from clean to high-gain can be obtained, making it suitable for any genre of music. The coil tap function has been omitted due to the replacement. It features a powerful humbucker sound.

The Floyd Rose FRT-5000 tremolo and Gotoh pegs provide stable tuning performance. This is one guitar you can rely on.
There are scratches, dents, and dull parts.
An arming adjuster has been installed.
There is a paint crack at the base of the tone pot.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: ED1045319
Case: Non-authentic soft case
Weight: 3.62kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 22.3mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number ED1045319

CaseNon-genuine soft case

Weight 3.62kg

No truss rod problem.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.7mm

Neck thickness near 1st fret 19.5mm

Neck thickness 22.3mm near 12th fret

Scale 648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon