USED Bill Lawrence / BC0R-55B Takehiko Kogure Signature Model [11]

Signature model of Takehiko Kogure, who was active in RED WARRIORS, etc.
This is a rare one with very few copies in circulation, made in Japan by Bill Lawrence. Commonly called "Shake Model".
The simple one pickup, one volume design produces a straightforward sound that directly reflects the picking nuance. It has a taut and contoured sound that matches well with rock and blues lead playing.
The body is estimated to be made of alder, the neck of maple, and the fingerboard of rosewood, providing a well-balanced configuration that is easy to handle.
Missing arms and back panel.
The missing nut has been replaced with an ox bone nut.
Overall, there are scratches, dents, and rust on the metal.
The neck is slightly twisted, but the frets have been fretted and are in good playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: B11084
Case: Non-authentic soft case
Accessories: * Arm missing
Weight: 3.42kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 23.3mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut replacement

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs: Item rank B: Fairly scratched and damaged.

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number B11084

Case: non-genuine soft case

Accessories* Arm missing

Weight 3.42kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, fret height is high enough

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.2mm

Neck thickness near 1st fret 20.7mm

Neck thickness near 12th fret 23.3mm

SCALE 648mm (25.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon nut replacement