USED Greco / GOB-900 Natural [11]

This is a high-end model of the "GOB" series, originally designed by Greco and introduced in the late 1970s.
This GOB-900, manufactured in 1978, combines a through-neck construction of laminated maple and walnut with a Sen laminate body for a robust and luxurious appearance. The design maximizes the sound of the wood, resulting in a powerful mid-low range and rich sustain.
Two humbuckers are mounted on the pickups, which output a wide range of sound despite being passive circuits. Tone control allows for a wide range of tones, from warm to funky attack.
The hardware and weighty body structure are typical of the high-end Japanese-made guitars of the time.
One mounting screw of the front pickup has been replaced due to a nut on the upper plate and deformation of the shaft.
There are some rust lumps on the back panel.
In addition, there are scratches, dents, and dull metal parts overall, showing signs of use due to age and use.
There are no noticeable problems with the neck condition and no playing problems.
Item Rank: B: Fairly scratched and worn, but no problems in normal use.

Serial Number: F786798
Year of manufacture: 1978
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.88kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, front pickup mount screws replaced

* Please note that this is a used instrument and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand this in advance.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number F786798

Year of manufacture 1978

Country of manufacture Japan

CaseNon-genuine soft case

Weight 4.88kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

No fret remainder problem, enough fret height

String height: 2.5mm above the 12th fret on the bass string side

String height 2.0mm above the 12th fret on the treble string side

Nut width 43.2mm

Neck thickness near 1st fret 21.0mm

Neck thickness near 12th fret 24.5mm

Scale 864mm (34")

RADIUS305mm (12")

Strings for setup D'Addario EXL165 / .045-.105 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, front pickup mount screws x 1 replaced