USED Fender Mexico / Cyclone Orange [11]

Fender Mexico Cyclone
The Cyclone is a unique Fender model from the 1990s and 2000s that combines the easy handling of a Mustang offset with a Strat tremolo and a practical pickup configuration. The 24.75" medium scale has a soft tension feel and can handle both chords and leads without stress. The combination of a single and a hum allows for a wide range of applications, from alternative, rock, to pop music. Although it is a mass-produced model, it has a strong character, and it is one that sticks with you even today.
There is a paint crack on the back of the neck near the skank. Cracks at neck pocket end, 6-string bridge screw hole, and lower part of the body have been reinforced with glue. cracks at the bottom of the PU cavity appear to be paint cracks. Two pots, toggle SW, and jack have been replaced.
The neck has been worn out due to torsional waviness and dented frets. The nut was cracked and has been replaced. The rear pickup has been replaced with a Duncan TB-4.
There are scratches, dents, dull parts, rust, and other signs of use.
No problems with current playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: MZ1127247
Case: Soft case
Weight: 3.62kg
Truss Rod: No problem, with a note that the rod has been checked up to 60 degrees to the left and right (torsion and waviness are present).
Fretboard: No problem, fretboard height is high enough.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.1mm
SCALE: 628mm (24.75")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut replacement, mortise and tenon adjustment, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.