USED Gibson USA / Les Paul Standard 1977-1978 Cherry Sunburst [11]

Vintage Les Paul Standard with the tradition and sound of the late 70's
The Gibson USA Les Paul Standard 1977-1978 has an easy-to-grip neck shape with a moderate thickness characteristic of the late '70s, and the combination of mahogany and curved maple produces a rich sustain.
It can be used for a wide range of sounds, from clean sounds to distorted rock sounds. The beautiful sunburst finish on the top and the age-specific texture make it a pleasure not only to play but also to own.
Although the parts have been replaced and the originality is low, the instrument is in player's condition and has been set up to be played well.
Overall, there are scratches, dents, dull parts, rust, and other signs of use.
The paint on the back of the neck is peeling due to use.
Front pickups are Steckard P.A.F. and rear pickups are 57+.
The bridge has been replaced with a KTS PR-01set N due to severe corrosion.
The frets are rusted and worn, so they have been worn out.
The neck is in good playing condition.
Two clasps of the hard case are broken.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 73637550
Year of manufacture: 1977-1978
Country of manufacture: USA
Case: Original hard case
Weight: 4.53kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 25.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (rear pickup replacement, jack replacement), nut replacement, bridge adhesion correction, bridge replacement, rear volume knob replacement, cavity panel sticker removal, body side sticker removal, and body side sticker removal. Removal of body side sticker, Installation of cover screws for missing parts inside cavity, Replacement of strap pins

* There are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of the item. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If there is a description of truss rod, remaining frets, or string height, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.