USED Squier / Classic Vibe '70s Stratocaster HSS Walnut [11]

A model paying homage to the iconic large headstock and classic look of the 1970s Stratocaster.
True to its name, this guitar is based on the 1970s Stratocaster style, but features an HSS layout with a humbucker in the bridge position, making it suitable for a wider range of genres. It features Alnico single-coil pickups in the neck and middle positions, delivering the clear, crisp clean and half-tone tones characteristic of a Strat, while the bridge humbucker produces a thick, powerful drive sound.
The neck features a maple neck with a vintage-tinted gloss finish, paired with a laurel fingerboard that offers a warm, mellow tone.
Combined with a 6-point vintage-style tremolo and classic hardware, it faithfully recreates the authentic look of the original. Even within the highly cost-effective Classic Vibe series, this model stands out for its excellent balance of practicality and design.
Tremolo arm missing.
There are dents and paint chips on the back of the body where the wood is visible. The cutaway area shows signs of paint deterioration due to age.
Additionally, there are scratches, dents, and rust on the metal parts throughout the body, showing signs of use.
The neck shows reverse bowing near the low frets, with twisting and warping. When played forcefully, the unamplified sound may have a slight buzzing. There are currently no issues with the amplified sound.
Condition Grade: B: Shows significant scratches and signs of use, but is suitable for normal use

Serial Number: ICS19132881
Country of Manufacture: Indonesia
Case: Soft case
Accessories: * Treble arm missing
Weight: 3.10 kg
Truss Rod: Note: Tested up to 60 degrees left and right with no issues (twist and waviness present)
Fret Wear: Within normal range; fret height is sufficient for playability
String height (low-E string): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.6 mm
Neck thickness near the 1st fret: 20.5 mm
Neck thickness near the 12th fret: 21.8 mm
Scale: 648mm (25.5")
Radius: 254mm (10")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling, electronics repair, deburring

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to remove product listings promptly upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.