USED Gibson USA / Flying V 67 Classic White [11]

A 1996 Gibson USA Flying V ’67, a recreation of the 1967 Flying V.
Featuring a Classic White body paired with an ebony fingerboard, this guitar has a striking presence.
It features a mahogany body and neck with an ebony fingerboard, and is equipped with two Gibson USA humbuckers. It has a 24.75-inch scale length, 22 frets, and features a Tune-O-Matic bridge and stop tailpiece. The pickups use mesh-shielded wiring, and the “Gibson USA” engraving is visible on the back of each pickup.

The tone pot has been replaced with a CTS pot without the Gibson logo. Additionally, conductive paint has been applied inside the control cavity.
There is evidence of previous repairs; cracks in the finish on both sides of the neck grip have been touched up. The repaired areas can be identified under a black light; they appear whiter than the surrounding finish.
Cracks and chips are visible in the clear coat on the sides of the fingerboard.
There is paint peeling, discoloration, and blackening at both ends of the body.
Overall, the finish shows signs of sun fading, and there are scratches, dents, and metal rust, indicating it has been well-used.
The neck shows slight warping and has a wavy profile. There are currently no issues with playability.
The latch on the hard case is broken and missing.
Condition Grade: B: Shows significant wear and signs of use, but is suitable for normal use

Serial Number: 90936750
Year of Manufacture: 1996
Country of Manufacture: United States
Case: Genuine hard case
Weight: 3.46 kg
Truss rod: No issues; rod movement tested up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.9 mm
Neck thickness near the 1st fret: 21.7 mm
Neck thickness near the 12th fret: 22.4 mm
Scale: 628 mm (24.75")
RADIUS: 305 mm (12")
Strings at Setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, nut slot correction on strings 6, 5, and 4, and jack cleaning

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret life, or string action were measured by our staff during setup; these values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not occur in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.