USED Gibson USA / Flying V 67 MOD Classic White [11]

The 67 reissue, one of the most popular Flying V's that have been getting more and more attention recently, is now in stock.
This one features a reproduction 1967-spec large pickguard.
The mahogany body/neck and ebony fingerboard configuration is well balanced with a rich midrange and a sharp attack.

The front pickups are GIBSON genuine logo engraved pickups, and the rear pickups have been changed to Duncan SH-4.
Short vibro roller type tremolo is installed.
The position of the end pin has been changed and the mark is still there.
There are touch-up marks on the side of the fingerboard.
Paint is peeling on the body edge. There are black stains from the side of the body to the back.
Overall, there are thin cracks.
Overall, there are scratches, stains, metal rust, and heavy use.
The neck is slightly wavy, but there are no problems with normal use.

Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: 91587719
Year of manufacture: 1997
Country of manufacture: USA
Case: Original hard case
Accessories: Tailpiece
Weight: 3.40kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 21.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair

Specs: Pieces

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
91587719

Year of manufacture
1997

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Tailpiece

Weight
3.40kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.5mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
21.8mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair