USED ESP / BOTTOM BUMP Stain Natural [12]

This bass is the result of a new concept, with a laminated body and neck made of multiple woods based on acoustic characteristics, and a well-thought-out body shape that is easy to handle and fits the body well.
The 5-piece through neck is made of hard maple and walnut, laminated with rich sounding alder, and the body wings are made of white ash and walnut.
The body wing is made of a combination of white ash and swamp ash for a full sound.
ESP original pickups and ESP Custom Lab's 3BAND EQ CINNAMON are built in for full sound creation.
The bridge can be back-threaded or top-loaded, and the tension and sound can be adjusted for each string.

There are many scratches, dents, and peeling paint throughout the entire body from the head to the body.
The paint under the pickguard also shows signs of use and peeling, indicating that the pickguard has been used without the pickguard.
The paint is originally matte, but has become shiny overall due to wear.
Although it has been used quite a bit, it has been maintained and cleaned at our repair center, and is in good playability condition.

Item Rank: B: Fairly scratched and worn, but no problems in normal use.

Serial Number: K0752208
Country of manufacture: Japan
Case: Original gig case
Weight: 3.26kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.0mm
Neck thickness near 1st fret: 20.1mm
Neck thickness near 12th fret: 23.8mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

Specs: D'Addario EXL165 / .045-.105 set

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
K0752208

Country of manufacture
Japan

Case
Genuine gig case

Weight
3.26kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.0mm

Neck thickness near 1st fret
20.1mm

Neck thickness near 12th fret
23.8mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment