USED Gibson / LG-1 1950s [12]

LG-1 in player's condition is now in stock.
The LG-1 was born in 1943 as a low-priced model of the LG-2, and its popularity continued to grow in the 1960s, especially among amateurs. The sound from the body with ladder bracing has a pleasant boxy sound that cannot be experienced on other models. This model is available at a very reasonable price for a vintage Gibson. This is a perfect first vintage Gibson.

The condition is as follows: bridge, nut, and saddle are newly made and replaced, pegs have been replaced in recent years, endpin and bridge pin crotch, bridge plate has been replaced, original parts except endpin are included. In addition, two bracings on the front side were missing, so they have been rebuilt and glued back on. In addition, the center of the body back, the left and right waist, and the lower part of the body have cracks that have been repaired in 4 places. Also, there is a thin over-lacquer applied to the entire body.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Year of manufacture: 1950s
Country of manufacture: USA
Case: Non-authentic semi-hard case
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 23.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, bridge replacement, saddle replacement, bridge plate replacement, all bracing peeled off, top ladder brace installed, pegs replaced, end pins installed, bridge pins installed, top wood crack fixed Back wood cracks fixed, thin over-lacquer treatment on the entire body

Specs

Item rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Year of manufacture
1950s

Country of manufacture
U.S.A.

Case
Non-Genuine Semi-Hard Case

Truss Rod
No problem, rod is confirmed to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
42.8mm

Neck Thickness near 1st Fret
23.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, bridge replacement, saddle replacement, bridge plate replacement, correction of all bracing peeling, top ladder brace installation, peg replacement, end pin installation, bridge pin installation, top wood crack correction, back wood crack correction Thinly over-lacquered the entire body