USED K.Nyui Custom Guitars / KNST Lake Placid Blue [12]

KNST by K. Nyui Custom Guitars, produced by Mr. Kazuhiko Nyui, the president of Guitar Workshop P.G.M., is now in stock.
The selection of wood and parts, pickup selection, and setup were all done by Mr. Nyui himself, and you can feel the solid technical skills of the many musicians who have worked on his instruments in Japan and abroad.
This instrument is based on the ST of the 60's, and uses carefully selected woods such as an alder body, maple neck, and Madagascar rosewood fingerboard.
Medium jumbo frets are used for a natural playing feel.
Three Lollar Vintage Blackface pickups are mounted on this guitar, which has a punchy sound with a balanced power feel and picks up picking nuances well, in keeping with the tone of the 60s.

There is a large paint peel on the body side of the 6th string side, and dents and chips scattered around the end of the body back.
The paint damage is noticeable, but the neck and frets are in good condition.
Although it has some signs of use, each part has been maintained and cleaned at our repair center, and playability is good.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 1619
Year of manufacture: 2021
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.62kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
1619

Year of manufacture
2021

Country of manufacture
Japan

Case
Soft case

Accessories
Arm

Weight
3.62kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.4mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
24.5mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing