USED Fender / Aerodyne Stratocaster AST Black [12]

This Stratocaster is named after Aerodyne, which means "heavy aircraft.
The gently curved round top shape fits the player's body perfectly.
The basswood body is lightweight and has a well-balanced sound, and the maple neck has a rosewood fingerboard.
A bent-saddle six-point synchro tremolo bridge is equipped with Cruson-type pegs.

There are multiple dings on the head side of the first string side and scattered dings on the neck grip.
The body also has numerous damages, including large and small dings on the 6-string side horn end and on the top, sides, and back of the body, as well as numerous scratches throughout the body.
There is a paint chip on the body end of the 6th string side due to a ding, and a large peel on the body end of the 1st string side.
The arm is missing, the nut has been replaced with a cow bone, and although it has some signs of use, it has been maintained and cleaned at our repair center, so playability is good.

Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial number: JD17009811
Year of manufacture: 2017
Country of manufacture: Japan
Case: non-genuine soft case
Weight: 3.20kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B: Fairly scratched and worn, but no problems in normal use.

12 months old

Serial No.
JD17009811

Year of manufacture
2017

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.20kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
23.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing