USED YAMAHA / Pacifica / PAC912J Old Violin Sunburst [12]

This is the initial model of the Pacifica series, one of the most representative Yamaha electric guitar models from 1991 to the present.
Based on the concept of "taking the best elements of traditional rock guitars and reconstructing them using the latest methods to create the next generation of originals," the Pacifica incorporates uniqueness in a traditional design that is still universal today, more than 30 years after its release.
Swamp ash body, hard maple neck/rosewood fingerboard with jumbo frets and FRT-licensed locking tremolo.
Only the rear humbucker is escutcheon-mounted in the S-S-H pickup layout, and the pickups are jointly developed by DiMaggio and Yamaha.
The neck shape is slimmer than the current Pacifica series, which can support technical playing and boasts high playability.
The thinly finished body is lightweight and fits easily to the body, making it easy to maneuver.

There are some minor scratches and dents scattered throughout, and the metal parts are tarnished.
Although it has some signs of use, it is still in good condition considering that it was made in 1991.
It has been maintained and cleaned at our repair center and is in good playability.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: IH23190
Year of manufacture: 1991
Country of manufacture: Taiwan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.14kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 19.7mm
Neck thickness near 12th fret: 21.5mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12"-406mm (16")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
IH23190

Year of manufacture
1991

Country of manufacture
Taiwan

Case
Non-genuine soft case

Accessories
Arm

Weight
3.14kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
19.7mm

Neck thickness near 12th fret
21.5mm

Scale
648mm (25.5")

RADIUS
305mm (12")-406mm (16")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment