USED Gibson USA / Les Paul Traditional 2016 Desert Burst [12]

Used 2016 spec Les Paul Traditional is now in stock.
The sharp tone of the hard maple and the deep, warm tone of the traditional weight-relief mahogany back provide the output of the traditional Les Paul sound.
The 57classic with Alnico II magnet, which is inspired by the late 50's PAF with real vintage tone and edgy contemporary tone, is mounted on the rear, and the 57 Classic Plus with slightly more windings is mounted on the bridge side for a glossy crunchy tone and a sobbing tone. The bridge side is equipped with a 57 Classic Plus with a slightly higher number of windings to produce glossy crunch and sobbing lead tones.
The comfortable 50s round neck profile, well-cut Graph Tech nut, and history-proven playability are all here, and the PLEK system and expert craftsmanship have taken this model to new heights after final tuning.

It is in good condition with only minor scuffs and scratches.
The playability is also good as each part has been maintained and cleaned at our repair center.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 160131177
Year of manufacture: 2016
Country of manufacture: USA
Case: Original hard case
Weight: 4.17kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 25.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
160131177

Year of manufacture
2016

Country of Manufacture
United States of America

Case.
Genuine hard case

Weight
4.17kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.7mm

Neck thickness near 1st fret
22.2mm

Neck thickness near 12th fret
25.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment