USED g'7 Special / g7-LPS Series 9 Figured Cherry Burst [12]

g'7 Special's realistic LP replica is now in stock.
This model is based on the 1959 LP by g'7 Special, a guitar workshop in Shinjuku that has been used by famous artists in Japan.
The body and neck are made of Honduran mahogany, and the fingerboard is made of Madagascar rosewood.
Two Vintage Maniacs Hysteric PAF pickups are installed, and the capacitors have been replaced with Orange Drops, and the original Bumblebee Replica is missing.
The bridge is a "Guardian APB-1" made of machined brass including the saddle, octave screw, and base, and the "Guardian Aluminum Tailpiece" has a machined aluminum tailpiece and steel stud anchor bolts. The hardware is also made of carefully selected parts.
The high-spec wood materials and carefully selected electrical parts/hardware have inherited the original mellow overtones and bright, deep sound of the LP.
There are many scratches, dents, and paint chips scattered throughout.
Metal parts such as pegs, pickups, bridge, and tailpiece are dull and rusty, but this is due to the aged finish.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
The smell of tobacco has been removed as much as possible, but there is still a strong smell of tobacco.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 9 1822
Country of manufacture: Japan
Case: Original hard case
Weight: 4.33kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.7mm
Neck thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 24.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
9 1822

Country of manufacture
Japan

Case
Genuine hard case

Weight
4.33kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.7mm

Neck thickness near 1st fret
22.3mm

Neck thickness near 12th fret
24.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair