USED Fender / Traditional II 70s Stratocaster Natural [12]

This model inherits the specifications of the ST71 ASH from the Fender Japan period.
It features a gloss-finished ash body and a 9.5" radius "U" shaped maple neck with 21 vintage-style frets.
Hardware includes Schaller F-KEY pegs and a synchronized tremolo with die-cast saddles, and the original pickups selected for the Traditional series produce a realistic and musical vintage tone.
The narrow nut width is designed to be easy to play for Japanese players.
There is a mark on the base of the neck where a crack has been repaired, but it does not affect the use of the guitar.
Overall, the instrument is in good condition with only minor scuffs and scratches.
The playability is also good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: JD23010584
Year of manufacture: 2023
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.86kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 22.7mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD23010584

Year of manufacture
2023

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
Arm

Weight
3.86kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.3mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
22.7mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment