USED Hand Guitars / Tonero See Through Black [12]

This handmade guitar has an impressive exotic design made of polymer clay (resin clay).
This is an original double cutaway model by the handmade guitar brand of JP Thomas, a guitar maker from the United States.

East Java mahogany body with 22 frets, 3-piece mahogany neck with set neck joint, Sulawesi ebony fingerboard with jumbo frets.
Several pickup options are available, but this model uses GOTOH AH-1N/AH-1B pickups.

A Polynesian tribal-style polymer clay center panel is embedded in the center of the body top, giving it a unique look rarely seen on other brands.
There are large paint chips on the back of the body at the end of the cutaway on the first string side and on the side of the back panel.
There is a paint crack on the back side of the nut, but it does not affect the wood.
There are some minor scratches, dings, and paint chips scattered throughout.
The neck is a little wavy, but has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Case: Non-genuine soft case
Weight: 4.15kg
Truss Rod: No problem, rod has been checked up to 60 degrees to the left and right (slight waviness)
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and deburring

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Case
Non-genuine soft case

Weight
4.15kg

Truss Rod
No problem (slight waviness)

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.0mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and deburring