USED Fender Japan / TL-3PU Black / Maple Fingerboard [12]

Out of catalog 3 pickup Telecaster is in stock!
This is a very rare model that was manufactured between 1997 and 2000 according to the serial number, but it was not listed in the catalog at that time, and no similar model can be found.
The stamp of SAMPLETL3PU on the neck pocket and neck end indicates that this model was literally made as a sample.

It has an ash body with elbow contour and back contour, rounded body edge, and pearloid pickguard.
It has three TEXAS SPACIAL pickups, six bridge saddles, and jumbo frets.

Since the exact model name is unknown, the neck end and neck pocket are stamped with TL3P, so it is labeled as TL-3PU.
There are some paint smudges on the tip of the head, some minor scratches and dents scattered throughout, and some metal parts are tarnished.
The head end has some paint smudging, and there are some minor scratches and dents scattered throughout the instrument.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: O020258
Year of manufacture: 1997-2002
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.60kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 23.4mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
O020258

Year of manufacture
1997-2002

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.60kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.7mm

Neck thickness near 1st fret
21.4mm

Neck thickness near 12th fret
23.4mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment