USED Gibson USA / Flying V 67 Reissue 2005 Classic White [12]

We now have a Flying V with ebony fretboard in stock!
This reissue model reproduces the features of the 1967 Flying V, and was made in 2005.
Usually rosewood fretboard is used, but only the classic white color has ebony fretboard in this period because of the noticeable paint transfer on the conduit at the end of the fretboard.

The mahogany body and neck are equipped with high-power 496R/500T pickups for hard distortion.

Despite its radical shape, the Flying V is lightweight, easy to handle, and playable at high frets, and the tasteful sound of mahogany has made it a favorite of many of the world's most famous guitarists.
Overall, there are spots due to yellowing of the paint, especially on the back of the head and the back of the body.
There are scratches and small paint cracks by the 6th string peg, and scattered dents around the outer edge of the body top.
Overall, there are some minor scratches and dings, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 0219150439
Year of manufacture: 2005
Country of manufacture: USA
Case: Original hard case
Included: Wrench
Weight: 3.20kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 22.2mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
0219150439

Year of manufacture
2005

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Wrench

Weight
3.20kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
22.2mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment