USED Fender USA / American Vintage 57 Stratocaster 1998 Black [12]

This 57 Stratocaster from the American Vintage series retains the taste of the good old days, but is assembled with the latest technology in machining precision.
The neck date and all pot dates indicate that it was made in 1998.

Alder body, one-piece maple neck with 7.25R radius fingerboard, and American Vintage pickups are mounted.

This is the 57 Strat that many people associate with the 60's style Strat type of yesteryear.
There are many scratches and dents scattered throughout the guitar. The "Original Custom Body" logo decal on the head top has been partially removed, and the paint is peeling around the neck side, fingerboard end, and joint plate on the first string side.
There are paint reaction marks on the body back and body end from guitar stands and case linings.
The pickguard is slightly lifted due to age, and the pickguard screws are slightly rusted, but they turn without problems.
The volume knob and selector fixing screw have been replaced.
The frets are low and there is an overall feeling of use, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: V114248
Year of manufacture: 1998
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 3.21kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Tolerance: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 23.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
V114248

Year of manufacture
1998

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Arm

Weight
3.21kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Fret remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

High string on treble string side
1.5mm above the 12th fret

Nut width
42.8mm

Neck thickness near 1st fret
21.8mm

Neck thickness near 12th fret
23.2mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment