USED Orville by Gibson / LPC / Les Paul Custom 1992 Antique Ivory [12]

We have just received a used Orville by Gibson Les Paul Custom made in 1992, which is very rare nowadays.
The brand has been re-evaluated in recent years, especially overseas, and is becoming more and more popular.

This Les Paul was made in Japan by Terada Gakki, which has a reputation for manufacturing Japanese-made Gretsch and Epiphone's Elitist series, and is from a period when deep joints were not used.

Basically, it is equipped with Gibson pickups, but there are various variations depending on the year of production, and this Les Paul has both front and rear pickups with Gibson USA engraving.

This guitar is equipped with Gibson USA engraved pickups for both front and rear. You can enjoy the quality of the Japanese-made construction and the sound that is typical of Les Paul Custom.
There is a paint chip on the tip of the head back, a scratch around the strap pin on the neck side, and two paint chips near the back panel.
The body back has scattered buckle scratches and dings, some discoloration on the body and neck binding, and tarnished gold parts.
The frets are worn and there are only a few frets left, but the instrument is playable in its current condition.
The guitar has been maintained and cleaned at our repair center, and is in good playable condition.
There are tape marks on the outside of the hard case, and TAKAKO & CRAZY BOYS 88 is written on the case.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: G202153
Year of manufacture: 1992
Country of manufacture: Japan
Case: Hard Case
Weight: 4.02kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Residuals: Need to consider replacing the frets next time it is repaired.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.8mm
SCALE: 628mm (24.75")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
G202153

Year of manufacture
1992

Country of manufacture
Japan

Case
Hard case

Weight
4.02kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder
Need to consider fret replacement at next repair

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
23.8mm

Scale
628mm (24.75")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing