USED Fender USA / American Standard Jazz Bass Upgrade 3-Color Sunburst [12]

This is the final version of the American Standard Series, upgraded in 2012.
This is a truly standard specification jazz bass that has been the core of the lineup for many years, with specification changes to match the times since 1988.

It features a thin undercoated alder body, rosewood fingerboard maple neck, high-mass vintage bridge with back-threaded brass saddle, and Custom Shop '60s Jazz Bass Pickup.
This model is a true standard with outstanding playability, deep mid-range vintage tone, and a solid presence in all genres.
There are some minor scratches and dings overall, but it is in good condition with little signs of use.
It has been maintained and cleaned at our repair center, and is in good playability.
The hard case that comes with the guitar is a Fender hard case, but it is not the original molded case, but a black Torx case.
The exterior of the case is partially peeling and two of the key fittings have been removed, so it is held in place by a single metal fitting in the middle.
It can be stored but is not suitable for transportation.
Item rank: B+: Some scratches, but no problem in normal use.

Serial number: US14031710
Year of manufacture: 2014
Country of manufacture: USA
Case: Original hard case
Weight: 4.31kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 37.4mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.1mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
US14031710

Year of manufacture
2014

Country of manufacture
United States of America

Case
Genuine hard case

Weight
4.31kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
37.4mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
24.1mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment