USED Aria Pro II / SB-700 1980 Oak [12]

The original model of the Aria Pro II, used by world-famous bassists.
The SB-700 is an original Aria Pro II bass with a through-neck construction and a long horn on the 4th string side.
The SB-700 has the simplest controls of the SB series, with a 5-piece maple/walnut neck and Canadian ash body wings.

The brass nut and bridge allow the sound to stand out and not detract from its presence in an ensemble.

Although this is a single humbucker pickup, the serial/parallel dual sound switch allows for a wide range of tones, from delicate to powerful.
There are paint chips scattered in the pickup cavity, and the body side has peeling paint and many dents.
There are also scratches and dents scattered throughout the body, and the metal parts are dull.

The instrument has been maintained and cleaned at our repair center, and there are no playability issues with the current setup.
Item Rank: C+: Needs repair depending on intended use.

Serial Number: 001057
Year of manufacture: 1980
Country of Manufacture: Japan
Case: Hard Case
Weight: 4.6kg
Truss Rod: Neck is fine at the limit of the rod
Fret Depth: No problem, sufficient fret height.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 45.0mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 24.7mm
SCALE: 864mm (34")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
C+: Needs repair depending on intended use

12 months old

Serial No.
001057

Year of manufacture
1980

Country of manufacture
Japan

Case
Hard case

Weight
4.6kg

Truss Rod
No problem with the neck at the limit of the rod

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
45.0mm

Neck thickness near 1st fret
21.7mm

Neck thickness near 12th fret
24.7mm

Scale
864mm (34")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair