USED MUSIC MAN / Axis EX 1997 Trans Red [12]

AXIS made in Japan is now in stock.
This model uses the same parts as the USA model and was produced in a domestic workshop designated by Ernie Ball/Musicman.
This model was made in 1997 according to the neck and body date.

The small body and asymmetrical grip neck boasts stress-free playability for long hours, and the simple volume-only control is also attractive.

The alder body is laminated with beautiful quilted maple on the top, and flame maple is used for the neck and fingerboard, making this guitar not only comfortable to play but also great to look at.
There is some paint peeling on the fingerboard surface from 5f-6f on the 1st and 2nd strings.
There are many fine scratches on the head top and the paint is peeling on the edge of the 6th string.
The body also has some minor scratches and dings, but there are few signs of use, and the neck grip is less darkened.
The strap pins have been replaced with Schaller locking pins, but the strap side parts are missing.
The strap pin has been replaced with a Schaller locking pin, but the strap side part is missing.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 89846
Year of manufacture: 1997
Country of manufacture: Japan
Case: Non-authentic gig case
Accessories: Arm
Weight: 3.63kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.5mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
89846

Year of manufacture
1997

Country of manufacture
Japan

Case
Non-genuine gig case

Accessories
Arm

Weight
3.63kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.8mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.5mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment