USED YAMAHA / Super Fighter SF1000 Yellow Natural [12]

An all-around model for the 198's fusion scene.
Maple top/alder back body, 2-piece maple/ebony fingerboard with 24 frets, and deep cutaway for smooth access to the high frets.

The original "F" humbucker, which is coil-tappable via a bi-sound system with push-lock switch, boasts a wide variety of sound variations.
There are numerous scratches and dings scattered throughout the head top and body.
Some of the plating on the pickup covers has peeled off, and the metal plates other than the front volume are missing.
The gold parts are tarnished, rusted, and the plating is peeling. The pickguard has been replaced with a clear one that appears to have been made by the owner.
The truss rod is fully tightened, but there are no problems with playing with the current setup.

The exterior of the case has some peeling and spray writing.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 001514
Country of manufacture: Japan
Case: Original hard case
Weight: 4.12kg
Truss Rod: Neck is fine at the limit of the rod
Fret Remaining: No problem, sufficient fret height.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 23.8mm
SCALE: 628mm (24.75")
RADIUS: 381mm (15")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number 001514

Country of manufacture Japan

CaseGenuine hard case

Weight 4.12kg

Truss RodThe neck is at the limit of the rod.

No fret remainder problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 43.3mm

Neck thickness near the 1st fret: 21.6mm

Neck thickness near 12th fret 23.8mm

Scale 628mm (24.75")

RADIUS381mm (15")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment