USED Gibson USA / Limited Edition Robot SG Special MOD Ebony [12]

A modified Robot Guitar with normal specs is now in stock.
This is the SG Special version of the "Robot Guitar," a limited edition model from 2008 that became the talk of the town for its revolutionary system that allows the guitar to be tuned automatically by simply strumming the strings.

The pegs with a built-in motor had a problem, so they were replaced with Grover pegs, and the electrical parts were also changed to normal specs, but the bridge/tailpiece and Neutrik locking jacks were left as original parts.

The bridge/tailpiece and Neutrik locking jacks are still original parts.
There are many scratches and dents throughout.
Although there are some signs of use and modifications, the guitar has been maintained and cleaned at our repair center, and is in good playability condition.
The original electrical parts are included, but the pegs with built-in motor are missing.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 020080427
Year of manufacture: 2008
Country of manufacture: USA
Case: Original hard case
Accessories: Original electrical parts
Weight: 3.41kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, enough fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 25.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2222 / .009-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number 020080427

Year of manufacture 2008

Country of manufactureUnited States

CaseOriginal hard case

AccessoriesOriginal electrical parts

Weight3.41kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret RemainingNo problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness near the 1st fret: 21.1mm

Neck thickness 25.0mm near 12th fret

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2222 / .009-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon