USED Fender USA / American Telecaster 2004 Natural / Maple Fingerboard [12]

An easy-to-handle model with a traditional form and modern specs.
Released in 1983 as the Standard Series and in 1986 as the American Standard Series, the American Telecaster was produced from 2000 to 2008 and is the predecessor of the current American Professional Series.

The body material is either alder or ash depending on the body color, but this instrument is made of ash because of its natural finish.
The fingerboard radius is 9.5" modern spec, and the one-piece maple neck has 22 frets.

The truss rod can be adjusted from the head side, and the 6-way saddle is user-friendly.
The pickup is an American Tele Single Coil, which can be used for a wide range of sounds from classical to modern.
There is a ding on the first fret on the 6th string side, and paint cracks and chips on the second and 13th frets on the 1st string side, but they do not affect playability.
The strap pins have been replaced with Schaller locking pins, but the strap side parts are missing.
The strap pin has been replaced with a Schaller locking pin, but the strap side part is missing.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: Z4014809
Year of manufacture: 2004
Country of manufacture: USA
Case: Original hard case
Weight: 3.76kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.3mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 22.6mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
Z4014809

Year of manufacture
2004

Country of manufacture
United States of America

Case
Genuine hard case

Weight
3.76kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.3mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
22.6mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair