USED Fender Custom Shop / Custom Stratocaster 2001 Vintage White [12]

A modern Stratocaster made by the Custom Shop has just arrived.
The certificate lists it as a Custom Stratocaster, but the Classic Player Strat on the neck end and the YAMANO stamp suggest that it is a Custom model with a roller nut, ordered by Yamano Gakki, the import distributor at the time. The guitar seems to be a custom model with a roller nut.

Alder body with maple neck/rosewood fingerboard with 22 frets, 9.5" fingerboard radius and medium jumbo frets.

Modern specs such as SPARZEL locking pegs and 2-point tremolo with vintage noiseless pickups give this model a traditional Fender sound with high functionality and operability.
Overall, the paint is yellowed due to age, and there are spots on the 6-string side horn due to paint reaction, and there are many large paint cracks scattered around.
There is a small ding near the base of the back of the head, but the neck grip has minimal damage.
There are two cracks on the pickguard, but they do not interfere with use.
The volume pot has been replaced, and although it has some signs of use, it has been maintained and cleaned at our repair center, so playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: CN94726
Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, Arm
Weight: 3.85kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 23.7mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number CN94726

Year of manufacture 2001

Country of manufactureAmerica

CaseGenuine hard case

AccessoriesCertificate, arm

Weight3.85kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness near the 1st fret: 21.3mm

Neck thickness near 12th fret 23.7mm

SCALE 648mm (25.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair