USED Kz Guitar Works / Kz ONE Semi-Hollow Kahler Lemon Yellow [12]

An up-and-coming Japanese brand with 23 different sound options.
Kz Guitar Works Kz One Semi-Hollow, a new up-and-coming handmade guitar brand with a workshop in Zushi, Kanagawa Prefecture, famous for producing the official signature model of Queen Brian May, is now in stock.

Partially hollowed mahogany body with beautiful quilted maple laminate on top, finished in lemon yellow with quilted wood grain.
It has a mahogany neck/rosewood fingerboard with 22 frets, 12" fingerboard radius, and 25" scale.

Three original KGW pickups are equipped, with on/off switch for each pickup, series/parallel mini switch, and volume and tone switch pots that can be pulled up to function as phase switches for the front pickup and center pickup respectively. The volume and tone switch pots function as phase switches for the front pickup and center pickup respectively.
By making full use of these switching functions, a variety of 23 different sounds can be realized.

The Kohler tremolo unit allows for smooth arming, and GOTOH locking pegs ensure stable tuning.
There are a few dents on the back of the body, but they are only minor scratches and are in good condition with little signs of use.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 20190315
Year of manufacture: 2019
Country of Manufacture: Japan
Case: hard case
Accessories: arms, manual
Weight: 3.88kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.6mm
Neck thickness near 1st fret: 23.3mm
Neck thickness near 12th fret: 25.3mm
SCALE: 635mm (25")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
20190315

Year of manufacture
2019

Country of Manufacture
Japan

Case
Hard Case

Accessories
Arm, Manual

Weight
3.88kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Rest of frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.6mm

Neck thickness near 1st fret
23.3mm

Neck thickness near 12th fret
25.3mm

Scale
635mm (25")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing