USED Fender Japan / Stratocaster ST54-900 1991 Tabacco Sunburst [12]

This is a higher-end model of the 1954 Spec Strat made by Fender Japan.
This model reproduces 1954 specs with a center bookmatched alder body, V-shaped maple neck, and round string guide.

Neck stamped 2-19-91, volume pot is illegible due to solder, but pot date of front tone R1379101 and center tone R1379046 determine that it was made in 1991.
There is a ST54-90 stamp on the body, but it is marked ST54-900 according to the 1991 catalog.

It has a lacquer finish, black bobbin USA-made pickups, and CTS pots, and is the second highest model after the top-of-the-line EXTRAD.

This is a rare item with very few in stock. Please consider this opportunity!
The lacquer paint on the body end has some melting and peeling due to the guitar stand.
There are several paint chips on the body side of the 6th string side, and there are also many scratches and dents scattered throughout.
The pickguard has numerous play marks and distortions from age, the control knobs are discolored, and the hardware is dull.
The second fret has some paint peeling due to dents, but this does not affect playability.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: J024583
Year of manufacture: 1991
Country of manufacture: Japan
Case: Non-authentic hard case
Accessories: Arm
Weight: 3.51kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problems in normal use.

Serial number J024583

Year of manufacture 1991

Country of manufacture Japan

CaseNon-genuine hard case

AccessoriesArm

Weight3.51kg

No truss rod problemNo truss rod problem.

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.4mm

Neck thickness near the 1st fret: 21.1mm

Neck thickness near 12th fret 24.1mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair