USED Fender Japan / Stratocaster ST62 3Tone Sunburst [12]

Fender Japan period Stratocaster in stock.
This '62 model Stratocaster made by Fender Japan has a basswood body and maple neck/rosewood fingerboard with 21 frets.

The 3-ply pickguard, spaghetti logo, and other distinctive specifications circa 1962 are reproduced.

The serial number font suggests that it was made by Dyna Instruments in 2010-2012, but the pickguard, pickup covers, and volume knob are not aged white and may have been replaced.
There are numerous scratches and dings scattered throughout, and the hardware is dull.
The back panel and arm are missing and have some signs of use, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: U033200
Year of manufacture: 2010-2012
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.04kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 23.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number U033200

Year of manufacture 2010-2012

Country of manufacture Japan

CaseNon-genuine soft case

Weight 3.04kg

No truss rod problem, rod is fine, checked up to 60 degrees to the left and right

No fret residual problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.1mm

Neck thickness near the 1st fret: 21.3mm

Neck thickness near 12th fret 23.2mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair