USED Fujigen / Expert Odyssey EOS-ASH-M See Through Blue Burst [12]

A versatile model that can be used in all genres and scenes.
One of the flagship models of Fujigen, a trusted manufacturer of musical instruments for Fender Japan, Ibanez, and other Japanese makers, the Expert OS is now in stock.

The model in stock now features an ash body with a quarter-sawn one-piece maple neck and 22 frets.

The fret edges are smooth and spherical, allowing for stress-free positional movement.

The combination of GOTOH locking pegs and a two-point bridge provides smooth arming and stable tuning, and the rear pickup can be coil-tapped with a mini-switch, and there is a direct switch to the rear pickup.

In addition to the practical specifications, this guitar has a luminous position mark on the side of the neck, which is sure to be useful not only at home but also in the studio, on recordings, and on live stages.
There are some minor scratches and dents overall, but it is in good condition with little signs of use.
It has been maintained and cleaned at our repair center and is in good playability.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: K200585
Year of manufacture: 2020
Country of manufacture: Japan
Case: Original hard case
Accessories: Arm, Fret Guard
Weight: 3.34kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 22.8mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number K200585

Year of manufacture 2020

Country of manufacture Japan

Case Genuine hard case

AccessoriesArm, fret guard

Weight3.34kg

No truss rod problemNo truss rod problem, confirmed up to 60 degrees to the left and right

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.0mm

Neck thickness near 1st fret 21.5mm

Neck thickness 22.8mm near 12th fret

SCALE 648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment